ARESQ SQ1 opensource firmware
#define ESP32_I2C_SDA 21 // I2C bus pin on ESP32
#define ESP32_I2C_SCL 22 // I2C bus pin on ESP32
#define RESET_PIN 12
#define ENCODER_PIN_A 17
#define ENCODER_PIN_B 16
#define ENCODER_SWITCH 33
#define BAT_INFO 35
#define BEEPER 32
#define DISPLAY_LED 14
#define AUDIO_MUTE 27
#define PWR_ONOFF 13
#define KEY_OFF 26
setup()
pinMode(PWR_ONOFF, OUTPUT);
pinMode(KEY_OFF,INPUT);
digitalWrite(PWR_ONOFF, 1);
digitalWrite(DISPLAY_LED, 0);
l2160:if (Mutestat) digitalWrite(PWR_ONOFF, 0); else si4735.setAudioMute(audioMuteOff);
Hardware information:
SI4735_2.8_TFT_SI5351_V4.0_AQ1.zip
SI4735_2.8_TFT_SI5351_V4.3_AQ1.rar
V4.3 add press Power Button 10 time to force poweroff
SI4735_2.8_TFT_SI5351_V4.3_AQ1_bin.zip
sch.pdf
Hi
Is t possible to get full specification for this radio?
Kindly
Robert
specification is all on the chip si4732
Hi. After I updated the firmware up to V4.3, the sound in the speaker disappeared. But the sound is heard in the headphones. How can I solve this problem?..
good night,you just add the code:
#define AUDIO_MUTE 27
digitalWrite(AUDIO_MUTE, 0) or digitalWrite(AUDIO_MUTE, 1)
try which work.
Thanks, it help for me!
Good morning,
I bought an AQ1 on Aliexpress and in the splash screen shows me the SW V4.1 version: where can I download it or can you send it to me?
What are the differences with the V4.3?
I found the v5.2a now ,i test it.
https://github.com/Zardoz66/ATS-25
Which sw can I use to upgrade the .bin version of the V4.3?
You Can upgade any ESP32+ili9341+si473x radio,but you need change io port to this AQ1.
Hi,
When I programming the AQ1 with arduino I have the error message:
Failed to connect to ESP32: Wrong boot mode detected (0x13)! The chip needs to be in download mode.
Wrong something ??
Thank's.
Hi,programming the AQ1 need Press and Hold Power button,
and You Need Use ESP32 Dev Boards
I was installed the v5.2a version but the sound disappear please advise